Glossary - print - Sharpening Steel

Sharpening Steel - Glossary Term

view glossary term online: https://www.recipetips.com/glossary-term/t--34653/sharpening-steel.asp
Sharpening Steel
Straightening Steel
 
A tool that is used to continually keep edges of knife blades straight to maintain a sharp edge after each use. When a blade is repeatedly pushed against a cutting surface, it becomes dull and out of alignment or curled to one side or the other depending on how the knife is held during use. Although a slight curl or dullness in the blade is difficult to detect with the human eye, it is this repeated occurrence that requires a blade to be refreshed with a sharpening steel as often as possible. It is a common sight to see a chef carving or slicing meat and then using a steel to continually freshen the blade while cutting the meat. The procedure of freshening the blade simply allows the knife to remain continually straight or sharp and in excellent shape throughout the cutting activities.

To properly use a sharpening steel, position the tip against the Steel and hold the top of the blade out and away from the Steel at a 20º to 30º angle. With the Steel in one hand and the knife in the other, lightly draw the knife blade across the steel with a downward arcing motion, beginning at the edge closest to the handle and pulling it from handle to tip as the edge moves in an arc across the steel.

When selecting sharpening steels, consider the intended use, the length required for the knives being used, the shaft shape desired (round or elliptical), and the shaft material of the steel. A steel is designed to straighten the edge of the knife's blade to maintain its sharpness, which is why it is sometimes referred to as a straightening steel. Although the traditional Steel is round in shape, the steel may also have an elliptical shape to provide a wider straightening or sharpening surface.

Sharpening steels are made of a carbide composition such as silicon carbide, a ceramic material, or a diamond coated metal that has diamond dust bonded throughout the surface of the metal. With varying amounts of carbon, the steels have different degrees of hardness, which are classified according to the Rockwell scale, a standard for measuring the hardness of specific materials. It is required that the level of hardness for the steel be higher than the level of hardness of the blade being straightened in order for effective straightening to occur since a harder material is required to change the dimension of a softer material. Ceramic materials are harder than steel materials, so if the knife is made of an exceptionally hard metal, a ceramic steel may be the best choice for maintaining the knife's edge.